Coral Springs · Parkland · Nearby
Pool Filter Cleaning in Coral Springs & Parkland
Pool filter cleaning means taking the filter apart, cleaning the cartridges or grids (or backwashing sand), checking for tears and worn parts, and putting it back together at the right pressure. A clean filter keeps water clear and takes strain off the pump.
What's included
- Filter opened and inspected
- Cartridges or DE grids cleaned
- O-rings and gauge checked
- Sand filters backwashed and checked
- DE recharged where applicable
- Pressure reading before and after
Google rating
5.0 (15)
License
Licensed
Coverage
Insured
Experience
10+ years
How pool filter cleaning works
We note the pressure, shut the pump off and release the air before opening the tank. Then the cartridges or DE grids come out and every pleat gets cleaned.
While the filter is open we check the tank, the O-rings and the pressure gauge. Worn O-rings are where slow leaks and air leaks start.
Everything goes back together, the air gets purged and the pump restarts. We record the new pressure so you have a clean baseline to compare against.
Cartridge, DE and sand filters: what's different
Cartridge filters are common on South Florida home pools. They come out and get cleaned by hand, no backwashing.
DE filters catch the finest particles and need fresh DE powder after every cleaning. Sand filters clean themselves by backwashing, but the sand wears out and eventually needs replacing.
How you know your pool filter is due
Filter pressure climbs as the filter loads up. When it reads well above its clean baseline, water flow drops and the pool starts to look dull.
Weak return jets, cloudy water that won't clear and a pump that sounds strained are the other signs.
South Florida pollen, storms and your filter
Spring oak pollen coats the water in a yellow film that goes straight into the filter. Black olive drop and palm debris add to it all year.
Rainy season storms from June through October wash in dirt and sand, and a green pool cleanup loads a filter faster than anything. Expect more frequent cleanings in those stretches.
When cleaning isn't enough: cartridge replacement
Cartridges and grids wear out. Torn fabric, flattened pleats or a cartridge that won't come clean anymore means it's time for a new one.
We'll show you a photo before recommending a replacement, so you see what we see.
What drives the price of filter cleaning
Filter type sets the work: a large multi-cartridge filter takes longer than a single cartridge, and DE needs a fresh charge. Condition matters too, since a neglected filter takes more cleaning.
Replacement cartridges, grids, O-rings or sand are extra parts, and we tell you when one is needed.
FAQ
Pool Filter Cleaning: questions we get
Straight answers. Anything else, call or text us.
How often should a pool filter be cleaned in Florida?
It depends on the filter type and how much debris the pool gets. We watch the pressure every week and clean it when it's due, instead of guessing by the calendar.
When should cartridges be replaced?
When the pleats are torn, flattened or won't come clean anymore. We'll show you a photo before recommending a replacement.
Can I just hose off the cartridge myself?
You can, and it helps between cleanings. A full cleaning also checks the O-rings, gauge and tank, which is where small problems show up first.
Should I backwash my sand filter?
Yes, backwashing is how a sand filter cleans itself. If backwashing no longer brings the pressure down, the sand is likely worn out and needs replacing.
Why is my filter pressure high right after cleaning?
A high reading on a clean filter usually points elsewhere: a stuck gauge, a partly closed valve or a restriction in the return line. We check those before blaming the filter.
Why is my pool cloudy even with the pump running?
A dirty, torn or undersized filter is a common cause. Low chlorine or high pH can also cloud water, so we check the chemistry and the filter together.
